.. ..


In Red, existing screw in ARF Kit
In blue, missing screws. Hole is prepared for them but empty

Do not forget to replace with the same "set screw"
to avoid unbalanced tail rotor!

comments powered by Disqus

You might like also

Replace flexible vertical fins on kyosho caliber 30
Something Hit the vertical tail fins during a hard landing (nose in and backward, I was in panic mode) The tail blade hit the vertical fins! making a big noise. I stop everything to check was going on A: hit the ground B: hit the vertical fins Decide to replace it with a raptor 30 bin, white, bigger and stronger Draw a line and cut with any tool you add, be careful not to cut yourself in the finger. You …
5292 Days ago
Frame bracing mod
The frame is weak in places and needs some bracing when using the CCPM option to hold the servo tray from flexing. These arrangements eliminate the play on the cyclic/collective controls and gives a more rigid frame. Solution 1 by CK_ Solution 2 by d-n-jensen Solution 3 by Dominic Girard Braces under the radio tray, it's homepage is at: http://pages.infinit.net/heliweb/ Tray Flex solution Picture by John, website     …
5292 Days ago