Tail Rotor:
Effects: Excessive slope in tail control system
Possible causes:
  • The 2 pins CA3063 are worn (here after 54 flights)
    The plastic worn the metal, maybe due to speed and heat
    produc by high rpm rotation

Solution? replace with new pin...

You might like also

No Thumbnail was found
Parts you can store in case of... Main rotor blade grips Radio Tray frame. Mixing arms (CA3012) Main gear 90T but it act as a fuse for the main mast (it was in my first crash) …
5632 Days ago
Clean one way bearing
"Take out your one way bearing in the counter shaft bearing and clean it out real good. I had my one way bearning start sliping on me this weekend and at one point it completly let go and I had to auto down. When it had happend I couldn't tell what was wrong (engine still running) but I had a dramatic loss of head speed and barely got it down safely. I had thought that the main belt had broken. …
5632 Days ago
What to lubrificate?
Each week, you can add a drop oil in the red places, switch you helicopter on, and do not forget to move corresponding servo while adding oil. I'm using stich machine white Vaseline. …
5632 Days ago