Select Page

Glue your grips on the blade !

Glue your grips on the blade !

Mark the edge of the black plastic part with a pen
before removing
Thunder Tiger recommend you to glue your blade with epoxy glue.
Kyosho say nothing in the manual about this subject. I agree that
the Caliber 30 has 4 screws vs only 2 for the raptor 30….but
This mods increase security for sure and cost nothing :

  • Remove the blade covering under the plastic blade grips :
    trace an outline around the grips with a pen.
  • Then remove the grips.
  • Carefully cut the plastic wrap away with a cutter.
    Be carefull not to cut into the wood !!
  • Do this to both sides and use some epoxy to glue the grips on.

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments


Would love your thoughts, please comment.x