>Can you give me some advice on how to get the stock pins out of the hornet II main shaft. There are two. One in the  >main gear and one in the head block.

very depending... on the configuration of parts (with or without electronic and plastic) around...

• Only metal part -> in hoven 80°C, let dilatation work for You...
• A mix of plastics and metal without electronics-> in freezer -10°C during 2 hours , let dilatation work for You...
• A full heli around :-) use a grip like this one:  or a  smaller model ->
  
  
  
  apply a pressure on only one side of the pins with grip, the other side must touche only the main shaft

Interesting readings:

 Tricks of the Trade: Poor Man's Hornet 2

Tags See All Tags Add New Tag...

Please Enter New Tags Separated By Comma's
  Or Close

microheli  mshornet  rchelicopter  tips 

Comments

Add New Search RSS

Write comment
Name:
Email:	do not notifynotify
Title:
UBBCode:	-color-aquablackbluefuchsiagraygreenlimemaroonnavyolivepurpleredsilvertealwhiteyellow -size-tinysmallmediumlargehuge
Please input the anti-spam code that you can read in the image.

Powered by !JoomlaComment 3.20

3.20 Copyright (C) 2007 Alain Georgette / Copyright (C) 2006 Frantisek Hliva. All rights reserved."