| Date & Heli |
Reasons & Remarqs |
Price to repair
in France (A shame !) |
Price to repair
in USA
(Heliproz,
Rick's) |
Price to repair
in Hong Kong
(CyberHeli, Hobby
Net) |
| 08.10.2000 Raptor 30
|
Land
normally but in high grass Tail blade screw were too
tigh. Only break the
slider, don't forget not
to overtighten the tail blade,
|
Tail pitch slider
Total : 20⬠a
shame ! |
Rick's heli sell the part
alone
for less than 1$
Total : 0.90⬠91% less ! |
|
| 10.03.2002 Raptor 46
|
Stick
error while in nose-in + TX reset when Hit! Landing skid is cracked
on one leg. Canopy is a little bit deformed TX send back
to dealer for checkin.
|
Flybar 19.3â¬
blades fiber 41.2â¬
Main spur gear 21.34â¬
Total : 81.84â¬
a shame ! |
Flybar 5.14â¬
blades fiber 26â¬
Main spur gear 10.29â¬
Total : 41.34â¬
49.5% less ! |
Flybar 3.00â¬
blades fiber 20â¬
Main spur gear 7.14â¬
Total : 30.14â¬
63% less ! |
20.08.2002
1st Caliber 30 |
Blades not
enough bolted.
It was a tail boom hit, heli was going to fall on it's
side because it was in high
grass, recover on the other side made the blade moving
Only one blade hit the canopy. ;-) ,
blade have a small dent, pitch arm servo was bent a
little..raptor canopy has absorb the shock. |
Nothing ;-) |
Nothing ;-) |
Nothing ;-) |
13.03.2003
2nd Caliber 30 |
Stick error
while in nose-in
 - CA3043 Servo Frame Set was repared not replaced,
- Tail boom and blades from raptor30
(new parts never used).
- The main mast is not bend, will
try to figure out if it is true...
Generic
wood blade at $17 heliproz !
Total costs: $63 (bought everything in
Japan)
|
| CA3020 Main Mast |
⬠|
| CA3012
Mixing Arm |
⬠|
| CA3019 Main Gear 90T |
⬠|
| CA3009 Flybar |
⬠|
| CA3004 Spindle Shaft |
⬠|
| CA3048 Tail Pipe |
⬠|
| CA3049 Tail Boom |
⬠|
PV0065 Raptor canopy screen
15.28
PV0045 body complet â¬45.30
PV0066 Body only â¬38,50 |
$15.28 |
| CA3075 main blade |
|
| TOTAL |
|
|
| CA3020 Main Mast |
$11.79 |
| CA3012 Mixing Arm |
$8.99 |
| CA3019 Main Gear 90T |
$8.99 |
| CA3009 Flybar |
$6.09 |
| CA3004 Spindle Shaft |
$7.29 |
| CA3048 Tail Pipe |
$10.99 |
| CA3049 Tail Boom |
$11.39 |
| PV0065 Raptor canopy screen |
$5 |
| CA3075 main blade |
$37.99 |
| TOTAL |
$108 |
|
|
| CA3020
Main Mast |
$7 |
| CA3012 Mixing Arm |
$5 |
| CA3019 Main Gear 90T |
$5 |
| CA3009 Flybar |
$3 |
| CA3004 Spindle Shaft |
$4 |
| CA3048 Tail Pipe |
$8 |
| CA3049 Tail Boom |
$9 |
| PV0065 Raptor canopy screen |
$5 |
| CA3075 main blade |
$27 |
| TOTAL |
$63 |
|
| 29.03.2002 1st
Caliber 30
|
Mechanical
problem yet unknow
strange crash but totally my fault: when hovering the
heli was falling
on it's right side, I checked too fast and trim to the
opposite (6 or 7
point to the left), then I fly 5 min and loose control.
One more time,
if something change, land, cut off and verify everything,
damn
Strange because, I did not loose the Tail or main mast,
nor tail boom.
The biggest problem is the right main frame (brokenat red
line),
but it can be repair. see fix here
Total costs: $63 |
Tail case right and left 22⬠|
|
| CA3019 Main Gear 90T |
$5 |
| CA3004 Spindle Shaft |
$4 |
| CA3075 main blade |
$27 |
| CA3012 Mixing Arm |
$5 |
| TOTAL |
$41 |
|
|
Anyone has a tutorial for developing ...
what type of antifreeze do i use in m...
css lessons - css scrollbar examples ...
SILLY
Now I can stand at the station watchi...