Support

Forums

Contact Me

Add a harddisk led to Your XBOX

Add a led to your Xbox to see hard disk activity

This mod is quite risky, especially if you
can not solder with precision 

xboxIcon Legal Issues

  1. It is strictly forbidden to modify your xBox, sell or install mods chip in france.
  2. Even opening the XBOX is forbidden.
  3. Remember pirating is a crime, support the developers and film companies.

{mosgoogle center}

xboxIcon 1. How To

Required:
  • LED
  • Resistor 220 Ohms

The resistor (value depending of the LED power) has to be soldered on the longest LED wire



+5 Volts is taken from the connector, you can open the connector and close it without any difficulties

The trickiest part is to solder on pin39 the signal (negative)

You should also verify carefully your soldering, this tool may help



Drill a 3mm hole or bigger depending on LED size

Final Result


You might also like:
default thumbnail image alt
2699 days ago
Convert Your XBOX to NAS
Tomshardware has an interesting articles for all XBOX modder which prefer having an original Network
default thumbnail image alt
2711 days ago
XBMC for XBOX: huge success
This page Media Center with XBMC first publish on 2004-08-26 seems to have been a great success sinc
XBOX 360 hacking has start and XBOX 1 hack flashback
2754 days ago
XBOX 360 hacking has start and XBOX 1 hack flashback
The free60 wiki which aim to document ways to have a linux booting on XBOX360 is since 2 weeks onlin
default thumbnail image alt
2844 days ago
XBOX, XBMC troubleshootings...
I was hoping you could help me connect my xbox to my Apple computer. I have tried every FTP program
default thumbnail image alt
3007 days ago
Streaming multimedia content to your television
Streaming multimedia content to your television...a quick overview of existing solutions...
default thumbnail image alt
3080 days ago
If You do not have a XBOX...
No Xbox You can modded, but still wanting to use this beautiful piece of software: XBMC ?You may tak
blog comments powered by Disqus

Donations

Thank You for supporting my work