Roswell Flyer, HMX-4, Draganflyer

Tweet

Share

The Roswell Flyer or Draganflyer or HMX-4 flyer were designed by Mike Dammar at www.spectrolutions.com (a very cool man) They all shared a same design, just strong enough to fly indoor. It is the greatest machine i've ever flown, and all friends or people in the street agreed. The price is very high (as expensive as a picollo) but the price range is the same with all rc helicopter : all price can be easily divided by 2! I regret that only a few people can buy this wonderful machine but if you can afford one, do not hesitate : buy one, it is very stable in the air (3 gyro) but still required some helicopter knowledge.

Clone

	This is the Roswell Flyer or HMX-4 flyer. The old manufacturer of the Roswell Flyer (www.afot.com) disapear, but you can still aquire the HMX-4 at www.spectrolutions.com. Model is discontinued and can not be bought.
	This is the Draganflyer, can be bought at www.draganfly.com It has a much better frame in carbon.
	This is the Draganflyer XP, the big brother of the Roswell Flyer. Draganfly corp (www.draganfly.com) sell them.
	Glow version, build by a Swiss guy. A pics of this device flying was published in RCM magazine. No other info avalaible. Contact me HERE if you have informations.
	Daniel Prelinger version With no CPU at all only mixing devices and 3 gyro Page is HERE His plan is here (not tested and author do not respond)
http://www.inetport.com/~davisele/roswell.html	Richards Friedrich had a lot of knowledge using the basic stamp, great chance of success. Project Stopped.
	www.gizmocopter.org based on a linux system and pc104 card (expensive setup). Do not know if it fly. This project is trying to build a remote flying plattform and therefore use expensive devices to achieve their target.
	Vectron blackhawk, thethered version not so interesting except it's low price. ($90) Movered it's principle do not allow the TX to loose direct view on ship (infrared beam which act as a fixed reference for the control)
	CL327 Origin : Canada Remote controlled Contra Rotor Rotor diameter : 4 meter Height : 1.84 m Empty weight : 150 kg (no fuel, no load) Gross take off mass : 350 kg Payload carrying capacity : 105 kg Speed : 157 km/h Ceiling : 5.5 km Climb rate : 7.6 m/sec Range : 200 km Mission : surveillance, border patrol...
	ENGAGER GS III E-770 500mm X 400mm, Height 120mm, Rotor size: 330mm, Weight: 300g, Ni-Cd-Akku 7,2V, 500mAh, 120g GYRO SAUCER II E-570 250mm, width 250mm, Height 75mm, Rotor size: 133mm, Weight: 85g, Ni-Cd-Akku 7,2V, 120mAh
	http://www.jugend-forscht.de/html/wet/i_lis.php ?id=1389&stichwort=&plz=&bundesland=Bayern& jahr=2003&fachgebiet=Technik Fuzzy controler and fast processor. Controlled with a hand glove.

Reviews

Great machine, except flight duration (3-4 or 5 minutes!). I hope that new generation of li-ion will help.

You might also like:

691 days ago

Shrediquette a Do It Yourself tri-rotor helicopter

This tricopter/ tri-rotor is a hobby project. Three MEMS gyroscopes and a two axis MEMS acceleromete

2567 days ago

An alternative to the draganflyer

<><><>X-UFO R/C SpaceshipA cheaper (200euro) alternative to the draganflyer&n

2587 days ago

Réparer/bricoler un draganflyer

 bonjour!j'habite en nouvelle caledonie, dans le pacifique sud, j'ai achete un "cerveau central " d

2684 days ago

Draganflyer V Ti

Mike Dammar has one more time done it! the greatest innovation for new comers and pilot enthousiast:

2782 days ago

LiPo for the Draganflyer

Tired of only being able to fly 3-4 min with your Draganflyer baby? the new generation of battery:

2815 days ago

Interesting links

Build your own roswell:www.ifrance.com/Phobos-flyer We planned to build our own roswell, using

2815 days ago

Where to buy it?

nullMike Dammar www.spectrolutions.com ou son distributeur www.draganfly.com (Canada) ou Mike John

2815 days ago

Roswell Flyer Manual

Roswell Flyer Manual The following instructions are meant t