Visit the Joomla! 1.5 demo site to see my extensions live running




/ 0
Legal Issues
{mosgoogle center}
1. How To
Required:
The resistor (value depending of the LED power) has to be soldered on the longest LED wire ![]() |
|
+5 Volts is taken from the connector, you can open the connector and close it without any difficulties![]() |
|
The trickiest part is to solder on pin39 the signal (negative)![]() You should also verify carefully your soldering, this tool may help |
|
Drill a 3mm hole or bigger depending on LED size![]() Final Result |
|
![]() |
Privacy Statement | Copyright Notice | Licenses
1999-2011 Cedric Walter - All Rights Reserved

