|
Thursday, 26 August 2004 21:46 |
|
Mark the edge of the black plastic part
with a pen
before removing |
Thunder Tiger recommend you to glue your blade with
epoxy glue.
Kyosho say nothing in the manual about this subject. I
agree that
the Caliber 30 has 4 screws vs only 2 for the raptor
30....but
This mods increase security for sure and cost nothing :- Remove the blade covering under the plastic blade
grips :
trace an outline around the grips with a pen. - Then remove the grips.
- Carefully cut the plastic wrap away with a
cutter.
Be carefull not to cut into the wood !! - Do this to both sides and use some epoxy to glue
the grips on.
|
|
Tags
