|
Saturday, 19 July 2008 01:03 |
Guide how to replace PS3 Laser Lens
version 1.0
Attention: This operation will void your warranty!!! I recommend you to send it to
SONY if bought your PS3 less than a year ago.
Attention: While this operation require no particular knowledge, don't try it if you
have no patience and feel not confident enough!
Attention: Look at other tutorials at the end of my article before starting, I did not represent
all steps in details. Use them to complete missing steps (this is my brother's PS3, mine
may die also soon, will complete tutorial then) DISCLAIMER: This tutorial is for information purposes, and I am not responsible or can
be held responsible if you screw up your PS3 by following this tutorial. Make sure the
PS3 is unplugged from mains power AT ALL TIMES. Mains power is dangerous!
Dismantle the Playstation 3 console and follow this tutorial at your own risk!
Duration: 25 minutes
Cost: 35 euro (SONY ask 200 euro, some shops 99 euro with 3 months warranty)
Tool required:
| Torx screwdriver TR10 : |  | Small flathead screw driver + Philips screwdriver |  | Order part: KES-400AAA on Internet or search for "ps3 lens" on EBAY. | | | Big flat space well lit | Operation done on 18 July 2008, PS3 fully working.
 | Prerequisites :-) |  | Remove the 8 screws, slightly lift up the back corners of the top half of the console. There is there 2 small clips near the back you may need to undo with a small screw driver. Now the top of the console should just lift off |  | 1. Lift the drive.
2. Unplug the power supply near the front right side of drive.
3. Remove the wide ribbon cable connecting the drive to the motherboard. |  | details of power supply near the front right side of drive.
|  | Remove the main board by removing the screws.
Put them beside in the same order as you did remove them. This will help a lot when you put everything back!
You can now remove the 2 metal plate that encase the ps3 BLU-RAY drive. |  | Remove the white plastic part that maintain the DVD in place and put beside.
You now see the drive plastic box.
More screws to remove to to open that black case. |  | remove these screws to be able to pull up the old ps3 lens out of the plastic case |  | Lens details |  | the old lens is now ready to die.
Metal axes can be removed ad will have to be transferred to the new lens |  | On the new lens, put the cable ribbon, by first pulling up the black clip (A), then insert the ribbon (B) and pull back the black clip . |  | On the old lens, the white plastic part has to be transferred to the new lens as well. |  | One screw to remove |  | Put axes on new lens and place it back in case. | | | screw everything back | | | | Comments, corrections are welcome. Other tutorials
|
|
Last Updated on Sunday, 20 July 2008 13:35 |
Tags
that very interesing to lean.Thanks for being so generous with your
